Our range of products include safety switch with separate actuator, schmersal solenoid interlocks, positions switches with safety function, safety switch for hinged guards, pvc safety sensors and pull-wire emergency stop switches.
Solenoid interlocks are safety devices used in industrial environments to ensure that machinery or equipment can only be accessed or operated under safe conditions. They are designed to prevent access to hazardous areas or to stop machinery from operating when unsafe conditions are detected.
Solenoid interlocks are safety devices used in industrial environments to ensure that machinery or equipment can only be accessed or operated under safe conditions.
Schmersal: A position switch, also known as a limit switch or proximity switch, is a type of electromechanical device used to detect the presence or absence of an object within a defined physical range or position.
Metal enclosure
Design to EN 50047
Plastic actuating element
Diameter actuating element 6 mm
LED version available
thermoplastic enclosure with foldable latching cover
Simple and quick to adjust the control elements by 45°.
Safety switches are critical components used in industrial and commercial settings to ensure the safety of personnel and equipment. These switches are designed to monitor the status of safety devices, such as guards, gates, doors, and other protective barriers, and to initiate appropriate actions to prevent hazards.
- Schmersal: Safety foot switches are mounted on machines and plants as permissive switches in cases where manual operation is not possible.
1 Cable entry M 20 x 1.5
Protective shield with wide opening
Low operating height of pedal
High level of stability
double-pedal type
2 cable entries M25
Protective shield with wide opening
High level of stability
- All safety foot switches are mounted with a shield to protect against unintentional operation. When the foot pedal is actuated to as far as pressure point, the NO contact is closed. If, in case of danger, the pedal is actuated beyond the pressure point, then the positive break NC contact is opened and mechanically latched. Reset operation is carried out by means of a push button. During the reset operation, the switch does not move through the switching-on point.
- The safety foot switches conform to protection class IP 65.
Two-hand control panels are safety devices used in industrial environments to ensure the safety of operators during manual operations involving machinery or equipment. They are designed to require simultaneous activation by both hands of the operator to initiate a hazardous operation, such as pressing two buttons or paddles located at a safe distance from the danger zone.
Schmersal: Emergency stop switches, often referred to as E-stops or emergency off (EMO) switches, are critical safety devices used in various machinery and industrial settings.
